AllcartuningTRACTORChiptuning TractorChiptuning Case IH

Case IH Chiptuning & ECO-Tuning

At Case IH, we also offer products for performance enhancement and diesel savings. After the specially developed chip tuning, your vehicle consumes up to 15% less fuel, has more horsepower and the torque increases up to 30%.




Chiptuning via OBD diagnosic
At Case IH, we optimize everything from Tier 3 to the Tier 4 Final Models via the OBD Diagnostic Interface. This means that no control unit has to be removed or disassembled.


  • Boost and non-boost range separately adjustable



AdBlue shutdown in Case Tier 4A and Tier 4F
Through new developments we are able to stop the AdBlue consumption via our software modification.

Meanwhile we can remove the Adblue pump and sensors from the Tier4A models.

After the modification you can remove the AdBlue unit (also a defective pump) and operate the tractor without the unit.


AGR shutdown at Case Farmall
By switching off the EGR valve, we prevent exhaust gases from returning to the fresh air system. In our tests we were able to detect up to 30% more oxygen in the exhaust gas than before the shutdown.


DPF removal on Case Farmall models with 3.4l engine
Using a proprietary developed system, you can replace your diesel particulate filter with a stainless steel exhaust and reprogram the tractor with a handheld flasher.



These modifications may not be used in all countries. A clarification is incumbent on the customer if he may use this modification in his country.